|
WAY o.t. - CPU liquid cooling :) (General Discussion)
WAY o.t. - CPU liquid cooling :) // General Discussion
Nov 10, 2001, 3:12am
For the adventurous sorts out there, I'm pleased to report that I have a
functional water-cooling system installed on the big Athlon box over here :)
Using an old but never-used automotive transmission cooling radiator,
coupled with a Swiftech MCW372-B copper/aluminum CPU water block and a small
60 GPM fountain pump, I have instantly lowered the CPU's operating
temperature by over 30 degrees F as compared to my old air cooler. Where it
used to run between a scorching (but frighteningly, well within spec)
135-145 degrees depending on room temp and CPU load, it now chugs along
happily between 100-105 degrees. And it's just "Frankenstein-ed" together
right now, sort of in the prototype phase. Once I get everything mounted
and situated permanently, I'm pretty sure that I can get it down under 100
consistently.
If anyone's ever thought about this, and has a few extra bucks to blow - you
can get complete prefab kits for a bit over $100 - I highly recommend taking
the plunge. It's very nifty :-)
Nov 10, 2001, 10:07am
Yeah it totally rocks the speed of your computer when the temperature is
lower. Most supercomputers are kept at -25º C hehe. I'm sure it'll be
standard in a couple of years to have a liquid nitrogen coolant system,
that's what they're talking about throwing into PC's.
--Bowen--
[View Quote]"dabartender" <admin at hooverae.com> wrote in message
news:3becc537 at server1.Activeworlds.com...
> For the adventurous sorts out there, I'm pleased to report that I have a
> functional water-cooling system installed on the big Athlon box over here
:)
>
> Using an old but never-used automotive transmission cooling radiator,
> coupled with a Swiftech MCW372-B copper/aluminum CPU water block and a
small
> 60 GPM fountain pump, I have instantly lowered the CPU's operating
> temperature by over 30 degrees F as compared to my old air cooler. Where
it
> used to run between a scorching (but frighteningly, well within spec)
> 135-145 degrees depending on room temp and CPU load, it now chugs along
> happily between 100-105 degrees. And it's just "Frankenstein-ed" together
> right now, sort of in the prototype phase. Once I get everything mounted
> and situated permanently, I'm pretty sure that I can get it down under 100
> consistently.
>
> If anyone's ever thought about this, and has a few extra bucks to blow -
you
> can get complete prefab kits for a bit over $100 - I highly recommend
taking
> the plunge. It's very nifty :-)
>
>
>
>
|
Nov 11, 2001, 9:40pm
Interesting, just have 1 concern how would you prevent water from leaking
onto the PC boards and things? the water tubes will get condensation on them
from time to time.
[View Quote]"dabartender" <admin at hooverae.com> wrote in message
news:3becc537 at server1.Activeworlds.com...
> For the adventurous sorts out there, I'm pleased to report that I have a
> functional water-cooling system installed on the big Athlon box over here
:)
>
> Using an old but never-used automotive transmission cooling radiator,
> coupled with a Swiftech MCW372-B copper/aluminum CPU water block and a
small
> 60 GPM fountain pump, I have instantly lowered the CPU's operating
> temperature by over 30 degrees F as compared to my old air cooler. Where
it
> used to run between a scorching (but frighteningly, well within spec)
> 135-145 degrees depending on room temp and CPU load, it now chugs along
> happily between 100-105 degrees. And it's just "Frankenstein-ed" together
> right now, sort of in the prototype phase. Once I get everything mounted
> and situated permanently, I'm pretty sure that I can get it down under 100
> consistently.
>
> If anyone's ever thought about this, and has a few extra bucks to blow -
you
> can get complete prefab kits for a bit over $100 - I highly recommend
taking
> the plunge. It's very nifty :-)
>
>
>
>
|
Nov 11, 2001, 9:44pm
Don't use Water, keeping it very cold with liquid nitrogen generally
prevents condensation to form on the outside of the tubes. Or you can put
the tubes inside another tube set.
--Bowen--
[View Quote]"data21" <dbmiller at kiski.net> wrote in message
news:3bef1a7b at server1.Activeworlds.com...
> Interesting, just have 1 concern how would you prevent water from leaking
> onto the PC boards and things? the water tubes will get condensation on
them
> from time to time.
>
>
> "dabartender" <admin at hooverae.com> wrote in message
> news:3becc537 at server1.Activeworlds.com...
here
> :)
> small
> it
together
mounted
100
> you
> taking
>
>
|
Nov 12, 2001, 12:40pm
Actually, I am using water :-) The only "active" cooling at this point is
the radiator, which has two 80mm fans pulling air through it. The water
itself stays slightly above room temp, and condensation isn't an issue. Not
enough delta-T to allow it.
If/when I decide to change the cooling medium, or add in a peltier for more
active cooling, then I'll have to investigate some sealing and insulation.
Workin' just great for now, though :-)
[View Quote]"bowen" <bowen at omegauniverse.com> wrote in message
news:3bef1b53$1 at server1.Activeworlds.com...
> Don't use Water, keeping it very cold with liquid nitrogen generally
> prevents condensation to form on the outside of the tubes. Or you can put
> the tubes inside another tube set.
>
|
Nov 12, 2001, 12:59pm
That's cool.. you should use liquid nitrogen ;) LoL It's the best stuff for
the job.. pretty much eliminates lagginess in computations due to the heat.
It's crazy they way they did it.. there's one that was completely submerged
into the liquid medium. I thought that was pretty cool :).
--Bowen--
[View Quote]"dabartender" <admin at hooverae.com> wrote in message
news:3befed74 at server1.Activeworlds.com...
> Actually, I am using water :-) The only "active" cooling at this point is
> the radiator, which has two 80mm fans pulling air through it. The water
> itself stays slightly above room temp, and condensation isn't an issue.
Not
> enough delta-T to allow it.
>
> If/when I decide to change the cooling medium, or add in a peltier for
more
> active cooling, then I'll have to investigate some sealing and insulation.
> Workin' just great for now, though :-)
>
> "bowen" <bowen at omegauniverse.com> wrote in message
> news:3bef1b53$1 at server1.Activeworlds.com...
put
>
>
>
|
Nov 12, 2001, 2:55pm
liquid nitrogen hmm better have good protection from vibration dont want
them tubes breaking on you.....
[View Quote]"bowen" <bowen at omegauniverse.com> wrote in message
news:3beff1d2$1 at server1.Activeworlds.com...
> That's cool.. you should use liquid nitrogen ;) LoL It's the best stuff
for
> the job.. pretty much eliminates lagginess in computations due to the
heat.
> It's crazy they way they did it.. there's one that was completely
submerged
> into the liquid medium. I thought that was pretty cool :).
>
> --Bowen--
>
> "dabartender" <admin at hooverae.com> wrote in message
> news:3befed74 at server1.Activeworlds.com...
is
> Not
> more
insulation.
> put
>
>
|
Nov 12, 2001, 8:34pm
You guys complicate things too much, I would just put my computer in the fridge lol
Fox Mc Cloud
"data21" <dbmiller at kiski.net> a écrit dans le message news: 3bf00d1a at server1.Activeworlds.com...
> liquid nitrogen hmm better have good protection from vibration dont want
> them tubes breaking on you.....
>
>
[View Quote]> "bowen" <bowen at omegauniverse.com> wrote in message
> news:3beff1d2$1 at server1.Activeworlds.com...
> for
> heat.
> submerged
> is
> insulation.
|
Nov 12, 2001, 9:20pm
LMAO
[View Quote]"foxmccloud" <FoxMcCloud at cyberbrain.com> wrote in message
news:3bf05c74$1 at server1.Activeworlds.com...
> You guys complicate things too much, I would just put my computer in the
fridge lol
>
> Fox Mc Cloud
>
> "data21" <dbmiller at kiski.net> a écrit dans le message news:
3bf00d1a at server1.Activeworlds.com...
want
stuff
point
water
issue.
for
generally
can
>
>
|
Nov 12, 2001, 9:58pm
LoL fox you're crazy.
--Bowen--
[View Quote]"data21" <dbmiller at kiski.net> wrote in message
news:3bf06741 at server1.Activeworlds.com...
> LMAO
>
>
> "foxmccloud" <FoxMcCloud at cyberbrain.com> wrote in message
> news:3bf05c74$1 at server1.Activeworlds.com...
> fridge lol
> 3bf00d1a at server1.Activeworlds.com...
> want
> stuff
the
> point
> water
> issue.
> for
> generally
you
> can
>
>
|
Nov 13, 2001, 12:05pm
liquid nitrogen? bah, use liquid helium ;-))
KAH
[View Quote]"bowen" <bowen at omegauniverse.com> wrote in message
news:3beff1d2$1 at server1.Activeworlds.com...
> That's cool.. you should use liquid nitrogen ;) LoL It's the best stuff
for
> the job.. pretty much eliminates lagginess in computations due to the
heat.
> It's crazy they way they did it.. there's one that was completely
submerged
> into the liquid medium. I thought that was pretty cool :).
>
> --Bowen--
>
> "dabartender" <admin at hooverae.com> wrote in message
> news:3befed74 at server1.Activeworlds.com...
is
> Not
> more
insulation.
> put
>
>
|
Nov 13, 2001, 4:31pm
too explosive around constant heat.. yes helium is explosive in certain
conditions :). Nitrogen doesn't have the same properties as the
hydrogen-helium group, so it doesn't become as unstable as fast as they
would (that's why they use helium for propellents in spacecraft). Of
course, my chem teacher would get on my case for not saying period or what
not.. but he was a quack (kinda like IA).
--Bowen--
[View Quote]"kah" <kah at kahbot.com> wrote in message
news:3bf136ab$1 at server1.Activeworlds.com...
> liquid nitrogen? bah, use liquid helium ;-))
>
> KAH
>
> "bowen" <bowen at omegauniverse.com> wrote in message
> news:3beff1d2$1 at server1.Activeworlds.com...
> for
> heat.
> submerged
point
> is
water
issue.
> insulation.
can
>
>
|
Nov 23, 2001, 2:11am
Yeah I was thinking the same thing...My sis had a fridge from her dorm. If
she doesn't want it and my other sis doesn't want it...I'll take out the
compressor and cool my PC with it. Don't refridgerators use freon?
Heres another thing: cool it with anti-freeze? just hope that the pipes
don't leak lol.
--
Captain MAD Mike
-Governor, PC Addict, Odd Man
[View Quote]"foxmccloud" <FoxMcCloud at cyberbrain.com> wrote in message
news:3bf05c74$1 at server1.Activeworlds.com...
> You guys complicate things too much, I would just put my computer in the
fridge lol
>
> Fox Mc Cloud
>
> "data21" <dbmiller at kiski.net> a écrit dans le message news:
3bf00d1a at server1.Activeworlds.com...
want
stuff
point
water
issue.
for
generally
can
>
>
|
|