|
Smc #23 - Cameras
About Truespace Archives
These pages are a copy of the official truespace forums prior to their removal somewhere around 2011.
They are retained here for archive purposes only.
Smc #23 - Cameras // Speed Model Challenge
Post by prodigy // Nov 18, 2007, 2:21pm
prodigy
Total Posts: 3029
|
Objective:
Model any type of CAMERA in under 2 hours
DEADLINE : December 8th 12:00 pm GMT -3:00
The rules:
1. Create the model(s) in the specified time.
2. You may enter as many times as you like.
3. Your entry should include a wireframe screen grab before subdivision has been applied, mainly this is so people can get an idea of how things were created and maybe learn something.
4. Include time spent, trueSpace version, render engine.
5. Post only one image per entry which must be no larger than 800x600 pixels. Final composition is up to you.
6. Render time, lighting and texturing are not included as people with slower computers may be at a disadvantage.
7. The winner is encouraged to place a tutorial in the new Tutorium showing how they made their entry (Contact Norm). Sometimes the wireframe isn't enough.
Good Luck to all! :banana:
Prodigy |
Post by jamesmc // Nov 18, 2007, 5:44pm
jamesmc
Total Posts: 2566
|
Sports Camera
Actually, an outdoors camera - red easy to find. :D
tS7.51
Modeling Time: 1:52
Texture Time: 55 minutes
Render Time: 25 minutes
Lightworks |
Post by Nez // Nov 20, 2007, 4:24am
Nez
Total Posts: 1102
|
Well to keep things moving, I'm posting my wireframe now and I'll come back and edit the post to add the finished render when that's done.
(edit: And here it is...)
Vintage SLR (based mostly on photo of a real camera)
Modelling time: 2 lunchbreaks! (2 hours) No SDS except on D-rings for strap (would have liked to add the strap but ran out of time for that). Otherwise all polys/sweeps, booleans etc.
Textures, lighting etc - tbc... guessing at another hour, so hope to post finished picture same time tomorrow! Back to (real) work now...
(edit - spent an hour and a half on shaders/textures and lighting - not 100% happy with the result as IBL shadow wasn't really strong enough and reflection in the floor just about disappeared, but having taken 2 hours to render, I didn't feel like tweaking it any more to sort it out better) |
Post by Changa // Nov 20, 2007, 4:46am
Changa
Total Posts: 187
|
My first camera. It was 35 years ago.
Model time 1:20, texturing 5 hours! UV is not my cup of tea. How did MadMouse manage the Fat Boy?
Found this info in Inet: Years of manufacturing 1961-1969. Made 1 992 546 pcs. Very strong camera. Fully manual:D My older daughter (photo hobbist) told me that she has found it in my Mom's house in Moscow. She wants to try it, but does not know what to do with all these rings and handles.:D
Edit: Last image is real! |
Post by jamesmc // Nov 20, 2007, 5:54am
jamesmc
Total Posts: 2566
|
trueSpace cameras :D
(well in my mind anyway)
tS7.51
Modeling Time: 15 min (rest were copies and spheres) cube, two pyramids :D
Texture: (30 minutes) to get the three shots rendered and place on all three camera backs.
Render Time: lightworks - about 20 minutes |
Post by prodigy // Nov 20, 2007, 7:54am
prodigy
Total Posts: 3029
|
Here is my entry..
Soft used ~ 100% tS7.5 100% workspace side
Modeling time 2 full hours.. can't finish it :(
Lighting 30 min.
Rended with Vray 1.52 ~ GI ~ Dof
Rendering time 15 mins.
9719
9717 |
Post by Tugar // Nov 20, 2007, 10:47am
Tugar
Total Posts: 68
|
Holy renderings Changa! How are the rest of us supposed to compete with that? Nice job. Maybe we should have an amateur division. :D
Well, here is my version of an early Star Trek holographic camera. Took me just about the whole two hours to make and about 5minutes to render. TS6.6 with built-in renderer. |
Post by jamesmc // Nov 24, 2007, 6:39am
jamesmc
Total Posts: 2566
|
You know you look - you know you do.
I mean you strain your neck trying to see, but never get a full on shot.
Not to worry because now there is BUTT CAM! :D
BUTT CAM is integrated Lens technology that uses your toilet tank as emersive fluid amplifier to display and preserve your BUTT SHOTS for later review. It can also display BUTT profiles on mirrors for real time BUTT SCENES.
:eek:
tS7.51
Texture: Mostly Shaders - 50 minutes
Construction Time: maybe 1 hour - it was spheres, cubes and torus - nothing complicated. :)
Render Time: about 40 minutes for different BUTT VIEWS :D |
Post by Georg // Nov 25, 2007, 2:09am
Georg
Total Posts: 270
|
webcam, based on a Logitech model but time was running out when I tried to do the base, therefore GLW, Georgies Little Webcam :)
SDS on base, everything else sweeping and booleans.
Fits nicely in James bathroom.
2 h modeling, texturing only color shader with reflections. Vray render with HDRI
Cheers
Georg |
Post by jamesmc // Nov 25, 2007, 6:53am
jamesmc
Total Posts: 2566
|
Flying Saucer Camera - Yeah, it's real. :D
This "Flying Saucer Camera" was first introduced back in 1953
and was designed specifically for the Air Force. It featured one
lens to "take regular pictures" while the second lens "separates
light into colors so scientists can judge the source and make-up
of saucers".
tS7.51
Render: Lightworx - about 40 minutes testing light effects, etc.
Texture: about 1 hour 20 minutes, fooling around with stuff, bump
Model Time: Less than an hour - basic cubes, cylinders and stuff :) |
Post by spyfrog // Dec 3, 2007, 10:14am
spyfrog
Total Posts: 181
|
Hi.
A fun exercise, but I run out of time as usual. A lot of detail to add if it is going to look like the real camera that I based it on.
Modelling: 2h
Texturing: about 2 hour, but not happy at all with it. Is there any more resources about this topic besides the Caligari video about texturing?
Modelling done in TS 6.6, texture in TS 7.51
Rendered with Vray. |
Post by kena // Dec 3, 2007, 7:38pm
kena
Total Posts: 2321
|
Sorry guys... I just could not resist....
A Pinhole Camera
Truespace 7.5 Model space used
Time to create and render - 15 min.
9892
9893 |
|