|
TS Speed Model Challenge #22 - Mask
About Truespace Archives
These pages are a copy of the official truespace forums prior to their removal somewhere around 2011.
They are retained here for archive purposes only.
TS Speed Model Challenge #22 - Mask // Speed Model Challenge
Post by blakeo // Oct 30, 2007, 11:32am
blakeo
Total Posts: 214
|
OK here's one for Halloween (or not if it's near the deadline and Halloween was two weeks ago ;) )
Objective:
Model any type of Mask in under 2 hours.
The rules:
1. Create the model in the specified time.
2. You may enter as many times as you like.
3. Your entry should include a wireframe screen grab before subdivision has been applied, mainly this is so people can get an idea of how things were created and maybe learn something.
4. Include time spent, trueSpace version, render engine.
5. Post only one image per entry which must be no larger than 800x600 pixels. Final composition is up to you.
6. Render time, lighting and texturing are not included as people with slower computers may be at a disadvantage.
7. The winner is encouraged to place a tutorial in the new Tutorium showing how they made their entry (Contact Norm). Sometimes the wireframe isn't enough.
Time limit - 120 minutes
Deadline - 11 PM GMT, Monday, November 12th, 2007
Subject - Mask
Post your entries below...
Post all comments on the Comments thread : http://forums1.caligari.com/truespace/showthread.php?t=4371
Speed Model Gallery: http://forums1.caligari.com/truespace/showthread.php?t=1577 |
Post by Tugar // Oct 31, 2007, 6:57am
Tugar
Total Posts: 68
|
In honor of the Iron Man movie coming out in summer, this is my tribute to the man in the metal mask. For those of you who aren't Iron Man fans, the original armor he built after he escaped was gold. |
Post by ed_baker // Oct 31, 2007, 4:17pm
ed_baker
Total Posts: 355
|
HEY EVERYONE . . Long time - no post.
HAPPY HALLOWEEN!
Here's what I came up with. Jason Voorhees' Hockey Mask from Friday the 13th.
I ran out of time, and ended up taking about 2 hrs 20 minutes. Mostly due to the shell tool not working right trying to make the mask hollow. Ended up booleaning a modified copy out of the original.
First image is my entry with the wireframe.
I hope no one minds that I also posted my beauty render that I finished. The knife is a freebee I found on the net.
Modeled mostly in 7.5 workspace side, and then finished up in the modeler (where all my problems started :mad:).
Enjoy! |
Post by Nez // Nov 2, 2007, 5:49am
Nez
Total Posts: 1102
|
I'm not much of one for Halloween, but here's a quick Scream mask...
bashed (crudely) together as follows:
TS version: TS 5.1
modelling: approx 45-50 mins (mostly basic - i.e. not very good! - SDS, with a bit of post-extraction boolean subtraction as I forgot that by making the eye-pieces separately I'd still need holes in the main mask...d'oh...)
textures/lighting - 5 mins or less
rendering - approx 2 mins with an IBL
If I spent a bit longer, I might get it looking a bit better, but doubt I'm going to have time before the deadline, so just have to live with it... |
Post by prodigy // Nov 2, 2007, 9:17pm
prodigy
Total Posts: 3029
|
My entry..
Modeling time 55 min
Lighting about 25 min
Render Time 20
9381
9382 |
Post by jamesmc // Nov 3, 2007, 2:36am
jamesmc
Total Posts: 2566
|
Decorative Masks
tS7.51
Model Time: 50 minutes
Texture, Shading, Render Time: 1 hour 12 minutes (lightray) |
Post by Georg // Nov 3, 2007, 10:24am
Georg
Total Posts: 270
|
Plain plane modeling. I started with the texture made in PS. A plane was quad divided a few times and textured with the mask as a TGA file. With the soft paint brush the cheeks, nose and brows were then pulled out and some of the sides were pushed back, very fast, very intuitive. Fantastic tools!
Modeling less than 15 min. Vray lighting, 30 min.
Georg |
Post by robert // Nov 3, 2007, 12:38pm
robert
Total Posts: 609
|
Time spent: about 35 mins
Truespace 7.51
Vray 1.51
http://i227.photobucket.com/albums/dd91/zukazamme/speedmaskoutline.jpghttp://i227.photobucket.com/albums/dd91/zukazamme/speedmask.jpg |
Post by 3dfrog // Nov 4, 2007, 10:02am
3dfrog
Total Posts: 1225
|
Here's my batman mask.
Modeling time: 1 hour
Material: 5 minutes
Render with Dribble: under a minute |
Post by Jack Edwards // Nov 4, 2007, 5:49pm
Jack Edwards
Total Posts: 4062
|
Decided to take a break from my current project and squeeze an SMC entry in.
Took the entire 2 hours.
TS 7.6b
DX9 realtime render
Enjoy:
9409
This mask is just begging for a Kabuki style paint job. Might post an update if I get the time to UV map and paint it. ;) |
Post by blakeo // Nov 6, 2007, 7:36am
blakeo
Total Posts: 214
|
Here a different sort of mask - just as an example because, of course, I won't be in the voting :)
Modelling time : Full 2 hours (again!)
tS : 7.51, workspace only
Render : Vray 1.51
B |
Post by rjeff // Nov 12, 2007, 11:41am
rjeff
Total Posts: 1260
|
I can't take my mask off...
gotta lighten the mood some! |
Post by Dragneye // Nov 12, 2007, 2:18pm
Dragneye
Total Posts: 602
|
rjeff HURRY HURRY!!! Put the mask on! You musta gotten a whiff of some poison gas or somtin! |
|