|
|
TS Speed model challenge # 9: "wheel"
About Truespace Archives
These pages are a copy of the official truespace forums prior to their removal somewhere around 2011.
They are retained here for archive purposes only.
TS Speed model challenge # 9: "wheel" // Speed Model Challenge
Post by Accu // Mar 1, 2007, 5:14am
|
Accu
Total Posts: 49
|
Objective: to model some kind of wheel in under 2 hours... Maybe you'd like to reinvent the wheel? If not, just render a resized cylinder and call it a wheel. :D
Rules (via copy-paste):
1. Create the model in the specified time.
2. You may enter as many times as you like.
3. Your entry should include a wireframe screen grap before subdivision has been applied, mainly this is so people can get an idea of how things were created and perhaps learn a few things.
4. Include time spent, trueSpace version, render engine.
5. Post only one image per entry which must be no larger than 800x600 pixels. Final composition is up to you and can include as many copies of the object as you wish.
6. Render time, lighting and texturing are not included as people with slower computers may be at a disadvantage.
Time limit - 120 minutes
Deadline - 12.00 AM G.M.T. Thursday 8th of March 2007
Subject - wheel |
Post by hemulin // Mar 2, 2007, 10:43am
|
hemulin
Total Posts: 1058
|
Heres my entry: The Dichroic Wheel |
Post by Vizu // Mar 2, 2007, 11:42am
|
Vizu
Total Posts: 628
|
Modeling in 7.1 = 25 Minutes
Rendering VRay 1.0 = 15 Minutes
http://www.wire-frame.de/trash/runwheel.jpg
http://www.wire-frame.de/trash/runwheelwire.jpg |
Post by Morgan // Mar 2, 2007, 9:15pm
|
Morgan
Total Posts: 138
|
Here's an old-fashioned wagon wheel, quick and easy. Spent more time trying to make the wood look a bit older than I did on the wheel itself...
EDIT: trueSpace 4.3 was used for this.
http://www.darnbeagles.com/images/3d/WagonWheel.jpg |
Post by Morgan // Mar 2, 2007, 10:44pm
|
Morgan
Total Posts: 138
|
Another entry. And yes, there really are holes throughout the whole thing. :D
http://www.darnbeagles.com/images/3d/CheeseWheel.jpg |
Post by prodigy // Mar 3, 2007, 6:14am
|
prodigy
Total Posts: 3029
|
Here is the first submision without Texture or shader..
4664
Rendertime 20Min and 120min only the modeling time..
In a few minutes im gonna send the finish artwork.. |
Post by prodigy // Mar 3, 2007, 9:23am
|
prodigy
Total Posts: 3029
|
Here is my final render.. all you can see are polygons.. theres no texture only shaders.. the lens flare are maded by post process one by one...
Hope nobody say i cant do make this wheel on 2 hours.. :D
I use the same technic as the clock.. ;)
4665
Best Regards...
BTW - Rueda Gigante means Giant Wheel.. |
Post by blakeo // Mar 3, 2007, 12:04pm
|
blakeo
Total Posts: 214
|
Very nice entires so far! Especially like the ferris wheel - I had also thought to do the London Eye but decided there's no way I could something like that in 2 hours! Nice one Mr. Prodigy. :)
Here's my entry - a Roulette Wheel. I took the whole 2 hours to get the model to here - there was more detail I wanted to add but it's so easy to get carried away. ;) I had to settle for a texture map for the numbers, so that may be considered a bit of a cheat? :confused:
I then spent many more hours getting the materials done. And the render took an hour in vray with HDRI... (Think I had the samples set too high but I'm not sure as I'm still learning about this stuff! :confused: )
Anyway, I really enjoy this challenge... |
Post by SteveBe // Mar 4, 2007, 5:15pm
|
SteveBe
Total Posts: 282
|
Speed model challenge # 9 "Wheel"
SteveBe
Model time: 60 minutes
Texture: 60 minutes
Render time: Instant
Truespace 7.11 Modeler & Player |
Post by W!ZARD // Mar 5, 2007, 4:28am
|
W!ZARD
Total Posts: 2603
|
It's commonly thought that the wheel was invented overnight by two cavemen called Grrr and Aargh after a heavy session on the Amanitas. In reality the wheel went through several important development stages. Here's a picture of an early prototype - as you can see there is still more research needed!
In the background, a strange dark monolith......
Wheel modelling - 25 mins
Stone ax and stone flakes modelling 45 mins
textures - approx 20 mins
Plants, background rocks and terrain are existing models from my HD.
Lighting setup - 10 mins
render time (at 1280x1024) approx 4 mins in tS 6.6 |
Post by Chester Desmond // Mar 5, 2007, 10:36am
|
Chester Desmond
Total Posts: 323
|
some real nice ones so far! I really like the lighting on your ferris wheel Prodigy.
Here's my entry |
Post by Accu // Mar 5, 2007, 9:42pm
|
Accu
Total Posts: 49
|
Quick reply - no time...
Hamster wheel for bipedal hamsters.
Modeled and rendered in tS6.6.
Time to model - 80 minutes.
Time to render... no idea.
I don't like it, but I don't think I'll have time to make anything else. :( |
Post by W!ZARD // Mar 6, 2007, 1:34am
|
W!ZARD
Total Posts: 2603
|
Ships wheel.
Geometry for wheel - 40 mins.
Textures - 20 minutes
Making wireframe image - 10 minutes
Reusing earlier ship model - 0 minutes
Composing and lighting - about an hour and a half!
Render time about 4 mins in tS 6.6 |
Post by prodigy // Mar 8, 2007, 11:36am
|
prodigy
Total Posts: 3029
|
Time to close this challenge.. Excelent entrys as allways!!
I have my winner.. ;) |
|
