|
|
tS Speed model challenge #8 "Brush"
About Truespace Archives
These pages are a copy of the official truespace forums prior to their removal somewhere around 2011.
They are retained here for archive purposes only.
tS Speed model challenge #8 "Brush" // Speed Model Challenge
Post by ed_baker // Feb 14, 2007, 3:40pm
|
ed_baker
Total Posts: 355
|
tS Speed model challenge #8 "Brush"
_________________________________________
I think this one should be interesting. There are tons of ideas that I can think of.
Objective:
Model any type of brush in under 2 hours. I can think of a dozen examples, but leave the decision up to you.
The rules:
1. Create the model in the specified time.
2. You may enter as many times as you like.
3. Your entry should include a wireframe screen grab before subdivision has been applied, mainly this is so people can get an idea of how things were created and maybe learn something.
4. Include time spent, trueSpace version, render engine.
5. Post only one image per entry which must be no larger than 800x600 pixels. Final composition is up to you and can include as many copies of the object as you wish.
6. Render time, lighting and texturing are not included as people with slower computers may be at a disadvantage.
**NEW - Optional**
7. The winner is encouraged to place a tutorial in the new Tutorium showing how they made their entry (Contact Norm). Sometimes the wireframe isn't enough. The how sometimes is just as important, if not more, than the what.
Time limit - 120 minutes
Deadline - 13:34 GMT (8:34 EST) Wednesday 21 February 2007
Subject - Brush
Good luck and lets see lots of entries and lots of votes!!!
To quote my father, "There is no such thing as a stupid question", likewise there is no so thing as a stupid or bad entry. This is for all of us to have fun and improve our skills! |
Post by jamesmc // Feb 14, 2007, 10:26pm
|
jamesmc
Total Posts: 2566
|
brushes and artist pallet.
What!? I'm first again to post, what a surprise! :D |
Post by Jack Edwards // Feb 15, 2007, 6:49am
|
Jack Edwards
Total Posts: 4062
|
Here's my entry:
4331
Haven't been as active with the forums of late and it's great to see the challenges are still going strong.
Looking forward to seeing everyone's entries! :)
-Jack. |
Post by GraySho // Feb 15, 2007, 12:04pm
|
GraySho
Total Posts: 695
|
My tablet airbrush.
http://www.spacerat.at/truespace/airbrush.jpg |
Post by Vizu // Feb 15, 2007, 12:08pm
|
Vizu
Total Posts: 628
|
Okay okay, here is my entry.
The problem is i have no focus on the 3 brushes here but this was my idea ...
http://www.wire-frame.de/trash/3-brushes.jpg
http://www.wire-frame.de/trash/3-brusheswire.jpg
The modelingtime (incl. 6 crashes) ;) was around 1 houre, rendering and a bit of thweak in Photoshop around 20 minutes.
Rendering in VRay, modeling TS 7.11 |
Post by prodigy // Feb 15, 2007, 5:32pm
|
prodigy
Total Posts: 3029
|
Here is my entry...
My Tooth Brush..
4338 |
Post by Morgan // Feb 15, 2007, 7:34pm
|
Morgan
Total Posts: 138
|
I did have some time to sit down at my home computer this evening, and had an idea that I didn't think would take too long. Of course, my execution was a bit lacking... but so it goes. Anyway, here's a simple hair brush, modeled with a metaball construct for the handle and back, and polys for the rest. |
Post by jamesmc // Feb 15, 2007, 9:07pm
|
jamesmc
Total Posts: 2566
|
Impenetrable Brush
My apologies in advance for taking advantage of the English language (not sure what brush is in German or Spanish). :D |
Post by jamesmc // Feb 15, 2007, 10:54pm
|
jamesmc
Total Posts: 2566
|
Shaving Brushes |
Post by jamesmc // Feb 15, 2007, 11:46pm
|
jamesmc
Total Posts: 2566
|
Lint Brushes
Buy one Get one Free! :D |
Post by jamesmc // Feb 16, 2007, 1:36am
|
jamesmc
Total Posts: 2566
|
Kiwi Shoebrush kit. |
Post by hemulin // Feb 16, 2007, 8:30am
|
hemulin
Total Posts: 1058
|
So.....here's your typical sweeping brush: |
Post by Chester Desmond // Feb 16, 2007, 9:18am
|
Chester Desmond
Total Posts: 323
|
*tiptoes in, throws down image, and scurries off* |
Post by wigmo // Feb 16, 2007, 5:18pm
|
wigmo
Total Posts: 40
|
Just in case the contest is still going on here is my motorized toilet brush
4386
4387
ts5
Hybird Radiosity
-Shawn |
Post by Steinie // Feb 16, 2007, 6:42pm
|
Steinie
Total Posts: 3667
|
Wigmo, we need your brush for some mouths here:) |
Post by brianalldridge // Feb 16, 2007, 7:13pm
|
brianalldridge
Total Posts: 397
|
Wigmo, we need your brush for some mouths here:)
lol, sorry I just got a little mad at all the bickering:p
Anyways, here's my entry. |
Post by kena // Feb 16, 2007, 7:43pm
|
kena
Total Posts: 2321
|
Title = Dryer Lint Brush
Time spent = 32 min
Version = Truespace 7.5
Render engine = Lightworks
4395
I used Cylinder and Torus.
Copied Cylinder several times and rotated it to get the first layer, then copied it 12 more times
Copied the torus several times and moved each one up to stack on the other
Bent a cylinder to provide the inside end-point.
4396 |
Post by Accu // Feb 17, 2007, 6:51am
|
Accu
Total Posts: 49
|
This is a high poly count brush of some kind... (my first entry in the speed model challenge).
Time spent - I'd say about 90 minutes - 40 for the first handle (scrap) and the initial fiddlin' with the trueParticles, 30 for the second handle (also scrap) and the finishing of the bristle and the last 20 for the handle in the image and fitting it together. I'm not at all organised and I didn't know what kind of brush I was making. :)
tS version - 6.6
Rendering engine - Lightworks
"Texturing" and "lighting" - 10-15 minutes
Rendering time - a lot! |
Post by 3dpdk // Feb 17, 2007, 8:33am
|
3dpdk
Total Posts: 212
|
Had a DivO (Division Officer) in the NAVY that complained that this certain little blond female Lt JG made his teeth itch. This was his birthday present. Not so much a tooth-brush as much as a tooth-scratcher.
4409
Total project time = 2hrs 45min
brush model time /w texture (all procedural) = 35 min
bathroom set / w textures = 1hr 0 min
lighting set up = 45 min
rendered with trueSpace 6.6
mirror steam provided by Paint Shop Pro 10
tub from tS objects library
shower curtain = NURBS plane
Elgin wrist watch for time keeping.
decision whether or not to submit to the "contest" = 1 week
amount of sleep lost over all this = 00000.0004406
(including globs of glue to hold in the nails)
44084407 |
Post by ProfessorKhaos // Feb 17, 2007, 8:55am
|
ProfessorKhaos
Total Posts: 622
|
lol 3dpdk... ya beat me to my idea... but just in part :)
"A brush with the mob"
TS7.11
45 min to model (not really a lot to the mesh part... nails are identical but rotated/scaled. Mostly object placement work with blood drops)
1 1/2 hrs to texture/light/render.. much went into the asphault and blood puddle textures. |
Post by Steinie // Feb 17, 2007, 9:01am
|
Steinie
Total Posts: 3667
|
I removed my first submission, needed more work. I added my additional time to this one.
"Brush With Death" |
Post by jamesmc // Feb 17, 2007, 9:25am
|
jamesmc
Total Posts: 2566
|
Electric Toothbrush |
Post by jamesmc // Feb 17, 2007, 10:15am
|
jamesmc
Total Posts: 2566
|
Alien Toothbrush with tongue scraper :D
tS66, light works, 45 minutes
(forgot to un-subdivide the wire) |
Post by blakeo // Feb 17, 2007, 12:15pm
|
blakeo
Total Posts: 214
|
Hi there - this is my first ever post to these forums... and also my first ever image post so that's a double first! I've used TS on and off for years - free version only - but have been seduced by quality of VRay and TS 7 so I splashed out :) TS7 is a bit of a jump tho...!
I didn't have time to completely finish the mdel. I'm not happy with the tops of the branches... but it's only a bit of fun eh? ;) Saying that - I spent hours trying to get the lighting half decent!
(I did make a clock for the last challenge also, but missed the deadline :( )
Anyway, here's my entry : |
Post by ed_baker // Feb 18, 2007, 3:55am
|
ed_baker
Total Posts: 355
|
Thats cheating!
To post comments on this challenge, please go here:
http://forums1.caligari.com/truespace/showthread.php?t=2251
Just use this thread for entries please.
Ed |
Post by Steinie // Feb 18, 2007, 5:48pm
|
Steinie
Total Posts: 3667
|
Yes, that is great. More entries please!
Ed
If you insist!:) |
Post by Nez // Feb 20, 2007, 5:24am
|
Nez
Total Posts: 1102
|
Well, here's my unfinished entry, just to add to the numbers. I've got so many meetings in the next 24 hours I won't have any more time to spend on it before the deadline, so I've rushed on some textures and called it a day. Woudl have liked to spend longer as think this had some potential, but that's life.
Model: broom-bot.
TS version 5.1
modelling time: 1 hour
textures/lighting/rendering: 10 minutes
You can have a wireframe if you want, but it's all polys, so nothing exciting there... |
Post by Accu // Feb 20, 2007, 5:30am
|
Accu
Total Posts: 49
|
And another one: a technologically advanced (but unfinished) brush.
Modeling - 111 minutes
tS version - 6.6
Rendering engine - Lightworks
"Texturing" and "lighting" - 10-15 minutes
I know I'm supposed to only post one image, but I couldn't fit the wireframe in my render so I used this here thumbnail:
http://img175.imageshack.us/img175/9693/electricwirefe4.th.jpg (http://img175.imageshack.us/my.php?image=electricwirefe4.jpg) |
Post by ProfessorKhaos // Feb 20, 2007, 5:37pm
|
ProfessorKhaos
Total Posts: 622
|
Cool! Even have specks of dust on the table top. :) |
Post by ed_baker // Feb 21, 2007, 3:38pm
|
ed_baker
Total Posts: 355
|
Thanks to everyone who participated in this challenge!!!!
It just keeps on getting better!
Due to constraints on the poll system, I had to split the poll into two threads. Please only vote in one.
Poll part one:
http://forums1.caligari.com/truespace/showthread.php?t=2279
Poll part two:
http://forums1.caligari.com/truespace/showthread.php?t=2280
Good luck to everyone!!!:jumpy:
Ed |
|
