ThreadBoard ArchivesSite FeaturesActiveworlds SupportHistoric Archives |
Teleporting & Warping Up & Down (Community)
Teleporting & Warping Up & Down // Communitypc hamsterJul 31, 2006, 3:09pm
Hi everyone:
I seem to have a little problem. Over the weekend, I installed an elevator shaft inside the corporate headquarters of my cable company using 3 tport.rwx objects (one for each floor). This morning, I added buttons that are supposed to take the user to each of the three floors. The user is supposed to click the button with their mouse in order to get to the floor in which they want to go to. However, when I tested the buttons I installed in the first floor elevator entrance, this is NOT happening for some strange reason (At least not for me). I tried clicking on BOTH the 2nd AND 3rd floor buttons (I saw no point in clicking the 1st floor button as it's just there to be consistent with the way a real elevator is supposed to look). Anyhow, when *I* click on the buttons, I wind up being warped or teleported (I used both commands BTW) up some 50+ meters off the ground before I float back down to the roof (Which is NOT where I want to be!). Here's an example of the command line I'm using on one of the buttons (NOTE: I'm using button_2.rwx as the button)... create sign; activate teleport 4898N 816E 6.0a If you put those coords. into the teleport field exactly as you see them above, you should be teleported inside the 2nd floor of Virtual Cable Inc. (My cable company). On the floor are a bunch of TV objects with all the various TV channels. Back to the buttons...Is there a workaround to this whereas I can have a working elevator system in which visitors can interact with in order to go up and down as they please? Would be nice. It's also CRITICAL that I get this done as my next build (the hospital) will need MULTIPLE elevators and elevator areas. If anyone can give me a pointer or two on how to accomplish this, it'd be greatly appreciated. :D I look forward to all the replies.... Cheers :D PC Hamster Mayor - City Of Hamsterville pchamster at comcast.net Denver, Colorado (my REAL city :-)) http://hamsterville.tripod.com/ HAMSTERVILLE GROUND ZERO - AW 5029N 500E SKYPE ME at patspodcast cienaJul 31, 2006, 3:32pm
I dont know one of mine is create sign;activate teleport 92.19N 216.56E
6.02a 180 and it works perfectly. all 10 floors work [View Quote] mauzJul 31, 2006, 6:57pm
[View Quote]
Altitude is in units of 10 meters and not meters.
So when AW taskbar shows that you are standing at 6.0 meters, you should put 0.6a in teleport coordinates. 6.0a would launch you 60 meters high. -- Mauz http://mauz.info |